Which chemical goes in when, at what temperature, and for how long. Use this guide to get clean, white, soft and hygienic linen - and to pick the right product for every stain.
Sort linen by colour, fabric and soil level. Treat bad stains with a spotter before washing.
8525- BHP Bio Spot, 8526- BHP Food Spot, 8211- BHP Pro Spot, 8022- BHP Black SpotA short cold rinse loosens loose dirt and blood before the main wash. Use it for heavily soiled linen.
Washing powder or liquid does the main cleaning. Add an emulsifier or booster for grease and heavy soil.
1242- BHP Plus, 1816- BHP Excel, 2569- BHP Pro Liquid, 3117- BHP Emulsifier Professional, 3178- BHP Penta BoostOxygen destainers remove stains on whites and colours. Chlorine bleach is for white cotton only.
7005- BHP Cool Dest, 7060- BHP Colour Safe, Bleach 14-15% (Sodium Hypochlorite)Two or three rinses remove dirt, detergent and bleach.
Sour neutralises leftover alkali. Softener makes linen soft. An antibacterial rinse adds hygiene.
5409- BHP Eco Rinse, 6064- BHP Chiffon Excel, 6027- BHP Plain Soft, 5437- BHP Lite CleanStarch gives table linen, napkins and chefswear a crisp finish.
4169- BHP Corn Starch, Liquid StarchSpin out the water, then tumble dry or iron. Keep the ironer bed waxed.
Ironer Wax 2kgTimes and temperatures are typical UK commercial laundry settings. Always follow the garment care label and your machine maker's programme.
| Linen type | Main wash | Why | Products |
|---|---|---|---|
| White cotton bed linen and towels | 60-75°C | High temperature gives the best whites and hygiene. | 1242- BHP Plus, 1087- BHP Professional, 2569- BHP Pro Liquid |
| Poly-cotton bed linen | 60°C | Too hot can crease poly-cotton. | 1242- BHP Plus, 2569- BHP Pro Liquid |
| Coloured and dark linen | 30-60°C | Use a product without optical brighteners to stop fading. | 1271- BHP Eco Wash, 2019- BHP Hero, 7060- BHP Colour Safe |
| Table linen, napkins, chefswear (heavy grease) | 60-75°C | Alkaline detergent + emulsifier. Finish with starch if needed. | 1816- BHP Excel, 2142- BHP Zeta, 3153- BHP Emulsifier Excel, 4169- BHP Corn Starch |
| Wool, silk and delicate garments | 30°C or below | Use the wet-clean range and follow the care label. | 0410- BHP Wet Spot, 0321- BHP Wet Wash, 0322- BHP Wet Finish |
| Linen that must be disinfected | 65°C for 10 min or 71°C for 3 min | UK guidance for thermal disinfection (HSE). For heat-sensitive items use an antibacterial final rinse. | 5437- BHP Lite Clean, 0437- BHP Wet Clean |
| Stain or problem | What to do | Products |
|---|---|---|
| Blood, egg, milk, cream, urine, vomit | Bio Spot first. Never use hot water or dry steam first - heat sets protein. Then a biological wash. | 8525- BHP Bio Spot, 1202- BHP Volt, 2224- BHP Biolux |
| Tea, coffee, juice, tomato, gravy, sweat | Food Spot before washing, then an oxygen destainer in the wash. | 8526- BHP Food Spot, 7005- BHP Cool Dest, 7060- BHP Colour Safe |
| Kitchen oil and grease | Emulsifier or booster with your detergent in a hot main wash. | 3117- BHP Emulsifier Professional, 3153- BHP Emulsifier Excel, 3178- BHP Penta Boost, 2142- BHP Zeta |
| Black marks, carbon, soot, engine oil | Black Spot before washing. For linen you would throw away, use the recovery process. | 8022- BHP Black Spot, 9307- BHP Fenix Ion, 9683- BHP Fenix |
| Ink, marker, paint, nail varnish | Pro Spot before washing. Seam test first. | 8211- BHP Pro Spot |
| Lipstick and make-up | Bio Spot before washing. | 8525- BHP Bio Spot |
| Mould, mildew and musty smells | Soak and wash with an oxygen stain remover. | 7060- BHP Colour Safe, 7005- BHP Cool Dest |
| Grey or yellow linen | Use a sour in the final rinse. Whiten white cotton with oxygen or chlorine bleach. Soften hard water. | 5409- BHP Eco Rinse, 7060- BHP Colour Safe, Bleach 14-15% (Sodium Hypochlorite), Water Softener Tablet Salt 25kg |
| Rust, metal and concrete stains | Sequestrant first, then the high-pH recovery detergent. | 9307- BHP Fenix Ion, 9683- BHP Fenix |
| Stiff linen and static | Fabric softener in the final rinse. | 6064- BHP Chiffon Excel, 6027- BHP Plain Soft, 6273- BHP Nature Soft |
| Bacteria and bad odour | Antibacterial final rinse (99.9% at 40°C) or an oxygen destainer. | 5437- BHP Lite Clean, 7005- BHP Cool Dest |
| Problem | Usual cause | How to fix it | Products |
|---|---|---|---|
| Greying or dull whites | Too little detergent for the water hardness, dirt going back onto the linen, or a wash that is too cool. | Use the hard-water dose, a fully built detergent and the right temperature. Add a sour in the final rinse. | 1242- BHP Plus, 1816- BHP Excel, 5409- BHP Eco Rinse |
| Yellowing | Overloading, poor rinsing, too much detergent, chlorine bleach left in, iron in the water, or drying too hot. | Load 80-90%, rinse well, measure the dose, use a sour or antichlor after bleach and do not over-dry. | 5409- BHP Eco Rinse, Sodium Metabisulphite (Sour / Antichlor), 7060- BHP Colour Safe |
| Grimy collars and cuffs | Body oils and sweat build up where fabric touches the skin. | Pre-spot, then wash with a built detergent plus an emulsifier. | 8526- BHP Food Spot, 3117- BHP Emulsifier Professional, 1242- BHP Plus |
| Rust or orange stains on whites | Iron from rusty pipework, steam lines, boilers or well water. | Fix the source, then treat with a sequestrant in a recovery wash. | 9307- BHP Fenix Ion, 9683- BHP Fenix |
| Spa oils and fake tan on towels | Massage oils and tanning products are oily and bind to cotton. | Hot wash with an emulsifier or booster added to the detergent. | 3153- BHP Emulsifier Excel, 3178- BHP Penta Boost, 2142- BHP Zeta |
| Colour run (stray dye) | Unsorted loads, coloured napkins, pens and party poppers. | Sort by colour, then treat with an oxygen destainer; badly affected linen may need a recovery wash. | 7060- BHP Colour Safe, 7005- BHP Cool Dest |
| Mould, mildew and musty smell | Damp linen left too long before washing or drying. | Wash or dry linen quickly. Soak and wash with an oxygen stain remover. | 7060- BHP Colour Safe, 7005- BHP Cool Dest |
| Harsh or stiff towels | Detergent or hard-water residue left in the fibres. | Correct dose, good rinsing, a sour and a fabric softener in the final rinse. | 5409- BHP Eco Rinse, 6064- BHP Chiffon Excel, 6027- BHP Plain Soft |
Always check the care label before choosing the temperature and products. These are the main symbols you will see on linen and garments.
Only in the final rinse. If you add softener with the detergent they cancel each other out and the linen does not get clean or soft.
Usually from leftover alkali or detergent, hard water, or too low a wash temperature. Use the correct dose, add a sour such as 5409- BHP Eco Rinse in the final rinse, and use an oxygen destainer or bleach for whites.
UK guidance for thermal disinfection is 65°C held for at least 10 minutes, or 71°C for at least 3 minutes. For heat-sensitive items use an antibacterial final rinse such as 5437- BHP Lite Clean, which kills 99.9% of bacteria at 40°C.
Weigh the dry laundry, check whether your water is soft or hard (London water is hard), choose the soil level, then use the dose per kg shown on each product page. More is not better - too much detergent leaves residue.
No. Never mix chlorine bleach with acids or sours - it releases toxic chlorine gas. Add bleach in its own step and rinse before the sour.
Yes. Tell us your machines, linen type and water area and we will suggest a full programme with the right products and doses.
The number, size and type of your washing machines, the types of linen you wash (for example bed linen, towels, table linen, workwear) and roughly how many kilos a week. We will then recommend products and quantities.
Tell us your machines, linen type and water area. We will recommend the products, doses and temperatures - free of charge.